SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD.

Encapsulation silicon rubber,LED silicone rubber,Potting compound,Silicone rubber,liquid silicone rubber, Manufacturer and Supplier - China(CN)

Addition cure encapsulating and potting compound

Addition cure encapsulating and potting compound

Business Information

  • Price : $13 USD
  • Min. Order : 20kgs
  • Certificate : ,,FDA,ISO9001
  • FOB Port : shenzhen
  • Made In : China(CN)
  • Packaging : 1KG,5KGS,20KGS,25KGS,200KGS
  • Supply Capability : 600 TON PER MONTH
  • Delivery Time : Within 5 days after receipt full payment
Favorites

Product Features

Addition cure encapsulating and potting compound

1.Product Feature of Electronic Potting Silicone Rubber

HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)、PP、ABS、PVC, etc. and metal materials.

2.Typical Application of Electronic Potting Silicone Rubber

HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.


3. Technical Guidelines of of Electronic Potting Silicone Rubber

a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.
If you need more information about silicone rubber, pls contact Ms Abbie:
Tel: +86-0755-89311348
Mob: +86-18938867560
Mail:hyab@resinpu.com
Facebook:HYJCY@SZRL.NET
YouTube:silicone0041@gmail.com
QQ:2355542681

 Addition cure encapsulating and potting compound

 

1. Product Feature of Electronic Potting Silicone Rubber


HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate)PPABSPVC, etc. and metal materials.

 

2. Typical Application of Electronic Potting Silicone Rubber

 

HY-9055 electronic potting silicone rubber could be applied to

- high powered electronics,  

- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. 


3. Technical Guidelines of of Electronic Potting Silicone Rubber 

 

a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

b, Mixing Ratio: part A: part B = 1:1 

c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

 

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80100℃, the silicone will cure in 15 minutes; while in 25℃ room temperature, the silicone will cure around 8 hours.


4.Notes of Electronic Potting Silicone Rubber


a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.

Organotin compound or Condensation silicone with organotin

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux

b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.

c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.

d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.

 

Technical Parameters of of Electronic Potting Silicone Rubber

Features

Part A

Part B

Before Curing

Appearence

Gray Fluid

White Fluid

Viscosisty25 centigrade cps

2500±500

2500±500

Operation features

Mixing Ratio

11

Viscosisty(after mixing) cps

20003000

Operating Time25 centigrade  hr

120

Curing time 25 centigrade,min

480

Curing time80 centigrade  hr

20

 

 

After Curing

HardnessShore  A

55±5

Thermal conductivity [Wm·K]

>=0.8

Dielectric StrengthKV/mm

≥25

Permittivity1.2MHz

3.03.3

Volume ResisivityΩ·cm

≥1.0×1016

linear expansibility [m/m·K]

≤2.2×10-4

Fire Resistance   

94-V1

(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

PACKAGE
40Kg/pail as a set (Part A 20Kg + Part B 20Kg) 

 

SHELF LIFE AND TRANSPORTATION

1. Twelve(12) months when stored at 24C in tightly closed original packages.

2. This kind of product is non-dangerous product, which could be transported as general chemicals.

3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

 

If you need more information about silicone rubber, pls contact Ms Abbie:

Tel: +86-0755-89311348

Mob: +86-18938867560

Mail:hyab@resinpu.com

Facebook:HYJCY@SZRL.NET

YouTube:silicone0041@gmail.com

QQ:2355542681

Product Specifications

Technical Parameters of of Electronic Potting Silicone Rubber
Features Part A Part B
Before Curing Appearence Gray Fluid White Fluid
Viscosisty(25 centigrade cps) 2500±500 2500±500
Operation features Mixing Ratio 1:1
Viscosisty(after mixing) (cps) 2000~3000
Operating Time(25 centigrade??hr) 120
Curing time (25 centigrade,min) 480
Curing time(80 centigrade??hr) 20
?

After Curing Hardness(Shore??A) 55±5
Thermal conductivity [W(m·K)] >=0.8
Dielectric Strength(KV/mm) ?25
Permittivity(1.2MHz) 3.0~3.3
Volume Resisivity(Ω·cm) ?1.0×1016
linear expansibility [m/(m·K)] ?2.2×10-4
Fire Resistance??? 94-V1
(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

Send messages to the supplier!

Please leave your comments here!

No data.

Other Related Products

Rank This Company

Please leave your comments here!