Can Solar Inc.
solar combiner box,IP65 water resistant,NEMA 4X,UV resistant,UL94V-0 flameproof, Manufacturer and Supplier - Canada(CA)
Information for Buyers
jA2415-104 Solar combiner box - pre-installed
- Input port: 2 sets; max. rated 16A per port; 4.0mm solar connectors formed on the combiner body.
- Output port: 1 set; max. rated 32A. Lug terminal type. Water-resistant glands are formed on the combiner body.
- DIN rails, stoppers: formed on the internal board of combiner.
- Space for component: two space for positive current paths, another two space for negative current paths; one space for 3TE type II SPD (surge arrestor).
- no internal cabling needed
- IP65 / NEMA 4X water-resistance, UL94V-0 flameproof. Fit to outdoor and indoor uses.
* pre-install fuse holders and SPD on requested.
Compact, safer, affordable cost and easier to conventional, good for small solar system.
Taiwan, USA and China patented.
IEC62109-1:2010, AS/NZS3100:2009, UL1741 certified
See below table,
Electrical Data and Safety
Max. Input Current / Fuse Rating (Midget): 25A DC per set (Pos. & Neg.)
Max. Continuous Input Current: 16A DC per set (Pos. & Neg.)
Contact Pin Resistance: Less than 0.5mOhm
Max. Output Current: 50A DC (Pos. & Neg.)
Max. Continuous Output Current: 32A DC (pos. & Neg.)
Rated Voltage: 1000Vdc (TUV), 600Vdc (UL)
Flame Class: UL94v-0
IP Code: IP65
Operation Temperature Range: -25 deg. C to +50 deg. C
Housing: PPO + PC
Sets of Input: 2 sets
Input Connectors: 4.0mm lathing pins, Tin plated brass
Output Terminals: Lug terminals, Tin plated brass
Output Cable Cross Section: 16mm2
Body Dimension (mm): 235(W) x 180(H) x 86.4(D)
Net Weight (g): 1,493
Earth Cable: 4mm2, 300mm long with ring-terminal
Send messages to the supplier!
Please leave your comments here!
Other Related Products