Stankopressmasch

CENTERLESS GRINDER,Hot forging press,forging,press,Steam-air forging hammer, Manufacturer and Supplier - Russia(RU)

All Categories :

Category Showroom (13)

  • Knuckle Joint press PINSK KB 8336 400t (3 pcs.)
    Knuckle Joint press PINSK KB 8336 400t (3 pcs.)

    Description : Knuckle Joint press PINSK KB 8336 400t (4 pcs.) Condition: full retrofit of mechanical parts, pneumatic and lubrication system. Installed full brand new modern electric system with PLC. Safety system, operator protection system, overload protection, mai

  • Hot forging press SMERAL LKM 4000
    Hot forging press SMERAL LKM 4000

    Description : Hot forging press SMERAL LKM 4000 Condition: good, full complete, dismantled. Press was inspected, dismantled and partially retrofitted by our specialists: - brand new connecting rod with full set of bronze was installed; - the bronze was adjusted accor

  • Hot forging press VORONEZH model K8544 2500t
    Hot forging press VORONEZH model K8544 2500t

    Description : Condition: good, full complete, not dismantled, not under power. YOM: 1979. Location - Izhevsk, Russia Technical specification: Force, t: 2500 Slider stroke length, mm: 350 Slider stroke length at maximum force, mm: 0,1 Unattainable-course, mm: 10 Numbe

  • Knuckle joint press K8336 400 ton Pinsk K 8336
    Knuckle joint press K8336 400 ton Pinsk K 8336

    Description : Condition: full retrofit of mechanical parts, pneumatic and lubrication system. Installed full brand new modern electric system with PLC. Safety system, operator protection system, overload protection, main motor speed control, counter for ram press posi

  • Hot forging press VORONEZH model KB 8542 A 1600t
    Hot forging press VORONEZH model KB 8542 A 1600t

    Description : Condition: still under power Year: 1980 Technical specification: Maximum force ton-force 1600 Slider stroke length mm 300 Slider strokes per minute 85 Maximum distance between table and slider (in lower position of slider) mm 660 Size of adjustment of dist

  • knuckle joint presses new model VORONEZH 4000 ton
    knuckle joint presses new model VORONEZH 4000 ton

    Description : From mobilization reserve. Good working condition. Full complete. Knuckle joint press new model VORONEZH 4000 ton Good working condition. Full complete by mechanical parts. We have two machines the different years of manufacture are 1988, 1990 Maximum fo

  • Hot forging press KRAMATORSK 4000t
    Hot forging press KRAMATORSK 4000t

    Description : Hot forging press KRAMATORSK 4000t Condition: in spite of layout, this press is almost unused. Technical specification: Force 4000t Stroke 400 mm Strokes per min 50 Shut height 1060 mm Adjustment 15 mm Distance between columns 1700 mm Slider dimensions 142

  • CENTERLESS GRINDER Mikrosa SASL 125x250
    CENTERLESS GRINDER Mikrosa SASL 125x250

    Description : CENTERLESS GRINDER Mikrosa SASL 125x250 - Grinding diameter max. 125mm - 630 x 250mm Sanding sheet - weight about 5 tons - Abmessugen approximately 2300 x 1620 x 3180 - strip set 4,8,16 - connecting power 15 kW

  • Trimming press Voronezh K9538 630t
    Trimming press Voronezh K9538 630t

    Description : Condition: good working, full complete Tech data: Maximum force ton-force 630 Slider stroke length mm 400 Number of courses of a slider per minute (continuous/single) 20 / 15 Maximum distance between table and slider (in lower position of slider) mm 750 Ta

  • Steam-air forging hammer KRAMATORSK MA2147 5t
    Steam-air forging hammer KRAMATORSK MA2147 5t

    Description : Steam-air forging hammer KRAMATORSK MA2147 5t Condition: good and working condition Year: 1982 Nominal weight of dropping parts, kg 5000 Actual mass of dropping parts without the upper tool, kg 5080 Max course of the hammer block, mm 1300